16 Levels
STEEZ 1083 - Console Preamp & Drum EQ for MPC
STEEZ 1083 - Console Preamp & Drum EQ for MPC
Couldn't load pickup availability
Console preamp + 3-band EQ · MPC standalone
The console channel your drums have been missing. Right on your MPC.
STEEZ 1083 is a preamp and equaliser in the style of the classic 1970s British class-A console channel, made for MPC standalone hardware and tuned for drums. Turn the red GAIN knob and kicks, snares and breaks pick up harmonics and soft-clipped peaks, from a light polish to full crunch. Then shape them with a high shelf, a mid bell and a low shelf at the classic frequency points, an 18 dB/octave high-pass filter, and a volume fader to set the level.
Coming soon
Windows and Mac versions are coming soon. This release is for MPC standalone hardware.

Why run your drums through it
Drums tracked through the big class-A desks hit with weight in the lows and a soft edge on the peaks, and the EQ on those channels was broad and musical enough to push hard. STEEZ 1083 puts that kind of channel on the MPC itself, so the kit sounds finished before the beat ever leaves the box.
Built for drums
13 presets for kicks, snares, hats, toms, overheads, breaks and the drum bus. Load one and adjust.
Push the red knob
GAIN drives the input stage. A little adds thickness. A lot rounds off the peaks and adds grit.
Broad, musical EQ
Wide shelves and a mid bell that tightens as you turn it up, so big boosts still sound natural.
Clean when you want it
At 0 dB of gain it stays close to transparent, and the three bands work as a straight tone control.
Inside the unit
The red knob
01 / Gain & EQ Knobs
The red GAIN knob sets how hard you hit the input stage. Next to it are the three blue-grey EQ knobs for the high shelf, the mid bell and the low shelf, each with a value window underneath.
- Gain-12 to +36 dB into the input stage
- HighShelf, -16 to +16 dB
- MidBell, -18 to +18 dB
- LowShelf, -16 to +16 dB

Click, don't hunt
02 / Stepped Frequencies & Hi-Pass
The frequency switches are stepped, like the console channel that inspired them, so settings are quick to dial in and easy to repeat. The high-pass filter is a steep 18 dB/octave, good for clearing rumble under a break or keeping hats out of the low end.
- Hi-PassOff, 50, 80, 160 or 300 Hz
- High10, 12 or 16 kHz
- Mid360 Hz, 700 Hz, 1.6, 3.2, 4.8 or 7.2 kHz
- Low35, 60, 110 or 220 Hz

The right-hand column
03 / Switches & Volume Fader
Three lit push buttons and a long-throw volume fader. Take the EQ out to hear the preamp on its own, flip the phase on a layered kick or snare, narrow the mid bell for a tighter boost or cut, and set the final level with the fader.
- EQSwitches the three bands and the high-pass in or out. The gain stage stays on
- PhaseInverts polarity
- Hi-QNarrows the mid bell
- Volume-40 to +12 dB

Hands on
04 / Drum Presets & Q-Links
Pick a preset and every knob, switch and the fader on screen move to its settings. The presets are level-matched, so you hear the tone change, not a volume jump. Every control is on the Q-Links: the top row is Gain, High, Mid and Low, the second row is the four frequency switches, and the third row is EQ, Phase, Hi-Q and Volume.
- KicksPunchy Kick, Sub Kick 808, Knock Kick
- SnaresSnare Crack, Fat Snare, Rim + Clap Snap
- Tops & tomsCrisp Hats, Overhead Air, Tom Thump
- Drum busDrum Bus Glue, Boom Bap Bus, Dusty Break, Parallel Smash
- Q-LinksAll twelve controls
- SavesSettings recall with your MPC project
Made for your MPC
No computer needed
Runs on the MPC itself as an insert effect on any track, bus or the main output.
One screen
Every knob, switch and the fader are on a single page between two wood cheeks. No menus.
Touchscreen and knobs
Turn the on-screen knobs, use the Q-Links, or double-tap a control for fine adjustment.
Light on the CPU
Small enough to put on every drum track in the kit, plus the bus.
What's included
- STEEZ 1083 insert effect plugin for MPC standalone hardware
- Builds for both MPC processor types in one folder
- 13 drum presets, plus an Init preset
- Install instructions
One-time purchase
Run the kit through it
$19 launch price, regular $29, no subscription. Download STEEZ 1083 right after checkout and put it on your drums today. Windows and Mac versions are coming soon.
System requirements
| MPC hardware | MPC X, Live, Live II, One, One+, Key 61, Key 37, Live III or XL, running MPC OS 3.10.1 or later, with Preferences → Enhancements (Beta) → Enable Enhancements and External Plugin Support turned on |
|---|---|
| Plugin type | Stereo insert effect for MPC standalone |
| Disk space | About 4 MB on your MPC drive |
| Windows and Mac | Coming soon. Not included in this release. |
| Not supported | Akai Force |
Before you buy
This is the MPC standalone version only. It does not run in a DAW or in the MPC desktop software. Windows and Mac versions are coming soon.
On the MPC, plugin support is still a beta feature of MPC OS. To install, unzip the download and copy the 6teen Levels - VST - STEEZ 1083 folder into the VST2 Plugins folder on your MPC drive, then restart the MPC. Full steps are in the INSTALL file inside the download. Version 1.0.1.
GAIN adds level as well as colour, the way the hardware does. Turn it up for more saturation and pull the volume fader down to match.
STEEZ 1083 is an independent product inspired by classic class-A console channels. It is our own design in that style, not a component-level copy of any hardware unit. It is not affiliated with, endorsed by or connected to AMS Neve, Akai Professional or inMusic Brands.

