16 Levels
AVE MCREE 1073 - Class-A Preamp & EQ for MPC
AVE MCREE 1073 - Class-A Preamp & EQ for MPC
Couldn't load pickup availability
Class-A preamp + 3-band EQ · MPC standalone
Console iron and a three-band EQ. Right on your MPC.
AVE MCREE 1073 is a preamp colour and equaliser in the style of the classic 1970s British class-A console channel, made for MPC standalone hardware. Turn the red DRIVE knob and your drums, bass and samples pick up transformer weight and class-A harmonics, from a clean polish to full crunch. Then shape the tone with a low shelf, a mid bell and a high shelf at the classic frequency points, plus an 18 dB/octave high-pass filter.
Coming soon
Windows and Mac versions are coming soon. This release is for MPC standalone hardware.

Why run your tracks through it
Records made on the big class-A desks have a weight in the lows and a soft edge on the peaks that comes from audio transformers and discrete gain stages being pushed. AVE MCREE 1073 models that behaviour, so you can add it on the MPC itself before the beat ever leaves the box.
Transformer weight
Bass notes saturate earlier than highs, the way real iron does, so kicks and 808s thicken first.
Level-matched drive
DRIVE adds colour, not volume, so you can hear what the saturation is really doing.
Clean when you want it
At DRIVE 0 it stays close to transparent, and the three EQ bands work as a straight tone control.
Oversampled
The whole circuit runs at 2x the MPC's sample rate, or 4x with HI-RES on, to keep heavy drive smooth.
Inside the unit
The red knob
01 / Drive & EQ Gains
DRIVE pushes the input transformer, the class-A gain stage and the output transformer harder with every step. Around 2 it's a subtle thickening. Past 6 it's obvious. At 10 it's crunch. Next to it are the three EQ gain knobs, each with a value window underneath.
- Drive0 to 10, about 3 dB harder into the circuit per step
- HighShelf, -16 to +16 dB
- MidBell, -18 to +18 dB
- LowShelf, -16 to +16 dB

Click, don't hunt
02 / Stepped Frequencies & Hi-Pass
The frequency switches are stepped, like the console channel that inspired them, so settings are quick to dial in and easy to repeat. The high-pass filter is a steep 18 dB/octave, good for clearing rumble under samples and tightening a muddy bass.
- Hi-PassOff, 50, 80, 160 or 300 Hz
- High10, 12 or 16 kHz
- Mid360 Hz, 700 Hz, 1.6, 3.2, 4.8 or 7.2 kHz
- Low35, 60, 110 or 220 Hz

The right-hand column
03 / Switches, Mid Q & Output
Three lit push buttons, a small MID Q knob and an output fader. Take the EQ out to hear the preamp colour on its own, turn on HI-RES for heavy drive on bright material, and trim the level with the fader.
- EQSwitches the three bands and the high-pass in or out. The preamp colour stays
- Hi-Res4x oversampling instead of 2x
- HissA faint analogue noise floor that mutes in silence
- Mid QWidth of the mid bell, 0.4 to 4
- Output-24 to +24 dB

Hands on
04 / Presets & Q-Links
Eight presets get you started, and every control is on the Q-Links. The top row is Drive, High, Mid and Low. The second row is the four frequency switches. The third row is EQ, Hi-Res, Mid Q and Output.
- PresetsInit, Vocal Air, Kick Weight, Snare Crack, Bass Growl, Drum Bus Glue, Sample Warmth, Iron Only
- Q-LinksAll thirteen controls
- SavesSettings recall with your MPC project
Made for your MPC
No computer needed
Runs on the MPC itself as an insert effect on any track, bus or the main output.
One screen
Every knob, switch and the fader are on a single page between two wood cheeks. No menus.
Touchscreen and knobs
Turn the on-screen knobs, use the Q-Links, or double-tap a control for fine adjustment.
Open source
Released under the GPL-3.0 licence. The full source code is included in the download.
What's included
- AVE MCREE 1073 insert effect plugin for MPC standalone hardware
- Builds for both MPC processor types in one folder
- 8 presets
- Install instructions
- Complete source code and licence (GPL-3.0)
One-time purchase
Add the iron
$19 launch price, regular $29, no subscription. Download AVE MCREE 1073 right after checkout and put it on your drums today. Windows and Mac versions are coming soon.
System requirements
| MPC hardware | MPC X, Live, Live II, One, One+, Key 61, Key 37, Live III or XL, running MPC OS 3.10.1 or later, with Preferences → Enhancements (Beta) → Enable Enhancements and External Plugin Support turned on |
|---|---|
| Plugin type | Stereo insert effect for MPC standalone |
| Disk space | About 4 MB on your MPC drive |
| Windows and Mac | Coming soon. Not included in this release. |
| Not supported | Akai Force |
Before you buy
This is the MPC standalone version only. It does not run in a DAW or in the MPC desktop software. Windows and Mac versions are coming soon.
On the MPC, plugin support is still a beta feature of MPC OS. To install, unzip the download and copy the 6teen Levels - VST - AVE MCREE 1073 folder into the VST2 Plugins folder on your MPC drive, then restart the MPC. Full steps are in the INSTALL file inside the download. Version 1.0.2.
AVE MCREE 1073 is free software under the GNU General Public License, version 3. It is based on the open-source EON AUDIO project and rebuilt for the MPC. The complete source code and the licence are in the download.
AVE MCREE 1073 is an independent product inspired by classic class-A console channels. It is our own model of how that kind of preamp and EQ behaves, not a component-level copy of any hardware unit. It is not affiliated with, endorsed by or connected to AMS Neve, Akai Professional or inMusic Brands.

